手提袋印刷是印刷行业中的一个主要的发展方向。虽然制作的过程非常的简单，但是还是有很多需要注意的细节，下面济南手提袋印刷厂家为您解说。

Handbag printing is a major development direction in the printing industry. Although the production process is very simple, there are still many details that need to be paid attention to. The following Jinan handbag printing factory explains for you.

1，在手提袋印刷的过程中，要注意同种油墨的使用，不要将不同性质的油墨进行混合，如果两者无法相溶，就会影响到手提袋的质量。

1. In the process of handbag printing, pay attention to the use of the same kind of ink, and do not mix different types of ink. If the two cannot be miscible, the quality of the handbag will be affected.

2，在印刷的时候要保证油墨的性质，要避免阳光直射，也要保持室内的温度，好是在10-26摄氏度内。

2. During printing, ensure the nature of the ink, avoid direct sunlight, and keep the indoor temperature within 10-26 ℃.

3，在进行手提袋印刷的过程中，油墨如果没有经常性的搅拌，很容易就会出现粘结，进而就会影响到手提袋的整体呈现效果。但是也要注意不要太稀释，那样印刷出来的产品就会有色差，可以适当的加入增稠剂进行调节。

3. In the process of handbag printing, if the ink is not stirred regularly, it is easy to bond, which will affect the overall presentation of the handbag. But also pay attention not to dilute too much, so that the printed products will have color difference, and you can properly add thickener to adjust.

4，在印刷的过程中，也要充分的发挥出水的作用，它可有有效地控制水墨粘度，也能起到平衡ph值的作用。如果发现ph值没有控制在8．5—9．5之间，就应该加入水或者是PH稳定剂进行调节。

4. In the process of printing, it is also necessary to give full play to the role of water, which can effectively control the viscosity of ink, and also play a role in balancing the ph value. If it is found that the ph value is not controlled between 8.5 and 9.5, water or PH stabilizer should be added for adjustment.

5，手提袋是一种高速的印刷，印刷的过程速度非常快，所以对油墨的干燥度也有着一定的要求，如果油墨的干燥速度过慢，可以适当的加入干燥剂来提升它的干燥速度，如果在油墨还没干的状态下就进行印刷很容易就会出现版面花掉黏脏的情况，从而也会影响到整体的印刷效率。

5. Handbag is a kind of high-speed printing. The printing process is very fast, so there are certain requirements for the dryness of the ink. If the drying speed of the ink is too slow, you can properly add a desiccant to improve its drying speed. If the ink is not dry when printing, it is easy to cause the page to peel off and stick dirty, which will also affect the overall printing efficiency.

6，印刷完成后，应该进行设备的清洗，要在设备上的油墨还处于粘稠状态的情况下清洗，这样才能提升清洗的速度，如果无法用清水清洗的可以适当的加入一些清洗剂。

6. After the printing is completed, the equipment should be cleaned when the ink on the equipment is still sticky, so as to improve the cleaning speed. If it is impossible to clean with clean water, some detergent can be added properly.

手提袋印刷过程中注意什么呢？以上从六个方面来为您解答了一下，更多注意事项就来我们网站http://www.xinfengyinshua.cn咨询。

What should we pay attention to in the process of handbag printing? The above answers for you from six aspects, and more precautions will come to our website http://www.xinfengyinshua.cn consulting service